Maple lumber collection
Clean, pale domestic alternative for furniture and utility builds.
View optionBrown Salwood Wood Guide
Wood species guide · Imported specialty hardwood
Brown Salwood is best understood by how it looks, how it works, and where it should be used. This guide explains the practical buying details before sending you to the right Kingma products.
Scientific nameAcacia aulacocarpa
Janka hardness1,720 lbf
Average dried weight45.2 lb/ft³
Best fitA relatively small tree
Overview
Why choose Brown Salwood?
Brown Salwood is a imported specialty hardwood associated with Australia, Papua New Guinea, Indonesia. It is useful when the project calls for a relatively small tree, the wood is straight-grained and of medium-heavy weight. the name acacia aulacocarpa is sometimes used very loosely to refer to a grouping of closely related acacia species that share similar characteristics. note: this is a truncated profile page
For SEO and customer usefulness, this page separates the science from the buying decision: appearance, working behaviour, durability, project fit, and then the right Kingma shopping path.
Scientific nameAcacia aulacocarpa
DistributionAustralia, Papua New Guinea, Indonesia
ShrinkageMovement varies; confirm the parent species, construction format, moisture, and project environment.
DurabilityDurability depends on the parent species, exposure, finish, and project detailing.
Brown Salwood colour, grain, and figure
Expect the appearance to vary board by board. A relatively small tree, the wood is straight-grained and of medium-heavy weight. The name Acacia aulacocarpa is sometimes used very loosely to refer to a grouping of closely related Acacia species that share similar characteristics. Note: This is a truncated profile page.
In practical selection, treat grain, figure, and texture as purchase-critical details. This profile has limited standardized commercial data, so confirm the actual board, origin, and supplier notes before specifying it.
Working notes
In the shop, start with sharp tooling, light cuts, dust collection, and test pieces; adjust feed rate and finish schedule to the actual board or blank.
Brown Salwood dust should be treated cautiously; use dust collection, eye protection, and a respirator when machining.
Brown Salwood should be sold by project fit: colour, workability, durability, and the format the customer actually needs.
Best uses for Brown Salwood
Best projects
A relatively small tree, the wood is straight-grained and of medium-heavy weight. The name Acacia aulacocarpa is sometimes used very loosely to refer to a grouping of closely related Acacia species that share similar characteristics. Note: This is a truncated profile page
Use caution
Avoid specifying it by name alone; confirm source species, board format, moisture, figure, defects, and the project environment before buying.
Finish strategy
Test finishes on offcuts first, especially when colour, blotching, outdoor exposure, or grain filling matters.
Buying note
Choose boards, slabs, plywood, blanks, or posts based on the project rather than species name alone.
Shop path
Buying Brown Salwood from Kingma
Start with the direct species match when Kingma sells it. If stock rotates, use the closest live collection or a clearly explained alternative.
Live edge slabs
Use when the customer cares more about slab format and visual impact than this exact species.
View optionSimilar woods and alternatives
If Kingma does not have an exact match online, use the buying links below as practical alternatives only when the colour, grain, hardness, format, or project use makes sense.
Brown Salwood FAQ
What is Brown Salwood best used for?
Brown Salwood is best considered for a relatively small tree, the wood is straight-grained and of medium-heavy weight. the name acacia aulacocarpa is sometimes used very loosely to refer to a grouping of closely related acacia species that share similar characteristics. note: this is a truncated profile page. Confirm exact board format, source material, colour, hardness, and finish plan before buying.
Is Brown Salwood beginner friendly?
Use extra caution with rare, figured, very dense, or non-standard materials. Test cuts on offcuts first, and choose Maple, Cherry, Walnut, or Poplar when easier machining is the priority.
Does Kingma sell Brown Salwood?
Use the buying section on this page. If an exact product is not listed, the linked alternatives are included only when they make practical sense for colour, grain, format, or project use.